WIN Enterprises PL-80930, Руководство пользователя

Страница: 28 / 117

Chapter 4. BIOS Setup
The ROM chip of your IP-80930 board is configured with a customized Basic
Input/Output System (BIOS) from AMI BIOS. The BIOS is a set of permanently
recorded program routines that give the system its fundamental operational
characteristics. It also tests the computer and determines how the computer
reacts to instructions that are part of programs.
The BIOS is made up of code and programs that provide the device-level control for
the major I/O devices in the system. It contains a set of routines (called POST, for
Power-On Self Test) that check out the system when you turn it on. The BIOS also
includes BIOS setup program, so no disk-based setup program is required CMOS
RAM stores information for:
•
Date and time
•
Memory capacity of the appliance
•
Type of display adapter installed
•
Number and type of disk drives
The CMOS memory is maintained by battery installed on the PL-80930 board. By
using the battery, all memory in CMOS can be retained when the system power
switch is turned off. The system BIOS also supports easy way to reload the CMOS
data when you replace the battery of the battery power lose.
4.1 Quick Setup
In most cases, you can quickly configure the system by choosing the following main
menu options:
1. Choose “Exit”
>
“Load Optimal Defaults” from the main menu. This loads the
setup default values from the BIOS Features Setup and Chipset Features Setup
screens.
2. Choose “Main” & “Advanced” from the main menu. This option lets you
configure the date and time, hard disk type, floppy disk drive type, primary
display and more.
3. In the main menu, press F4 (“Save and Exit”) to save your changes and reboot
the system.