WimTec SanTec ECOSAN, Инструкция по установке и эксплуатации

Страница: 10 / 20

Montage, Installation, xxx, xxx, xxx, xxx
10
Operation, Commande, Operación
Program 1 – standard (pre-adjusted)
Hands outside the active range, water
flow stops.
Water flows as long as hands are in the
active range. Automatic flushing stop after
60 s (adjustable).
1x
Push the small button on the left side of the tap
once. Continuous flow stops after the adjusted
time is elapsed or after pushing the button again.
Continuous flow:
2x
Push the small button on the left side of the
tap twice quickly (within 1 s)
Cleaning stop is activated for 180 s.
Cleaning stop ends after pushing the button
again once.
Cleaning stop:
Program 2 – Hygiene flushing every 3
rd
hour
as program 1, though hygiene flushing will be released for 10 s after 3 hours non-use
Program 3 – Hygiene flushing every 24
th
hour
as program 1, though hygiene flushing will be released for 10 s after 24 hours non-use
Program 4 – Hygiene flushing every 3
rd
hour + thermal disinfection
as program 2, though with the possibility of thermal disinfection for 10 min.
Thermal disinfection will be deactivated, if someone reaches the active range.
Activating thermal disinfection: by pushing the small button on the left side of the tap
four-times quickly (within 1,5 s)
Program 5 – Hygiene flushing every 24
th
hour + thermal disinfection
as program 3, though with the possibility of thermal disinfection for 10 min.
Thermal disinfection will be deactivated, if someone reaches the active range.
Activating thermal disinfection: by pushing the small button on the left side of the tap
four-times quickly (within 1,5 s)
1x
1x
F E GB