https://www.XPOtool.com
Item 63444–63445
Page 7
The Tool Experts
08 2022-1
Caution!
In extreme cold in winter, the pump can be damaged by the water freezing in the pump hous-
ing. After completing the work, drain the water in the housing and in the hose.
Maintenance after 30 hours
•
Remove and clean the spark plug.
•
Adjust the spark plug gap (0.6–0.7
mm).
•
Spark plug used: L7T (LD)
Maintenance after 50 hours
•
Remove the air filter and rinse it thoroughly.
•
After rinsing, thoroughly squeeze out the air filter and replace it.
Storage over a longer period
•
Drain water from pump, intake, and pressure lines.
•
Drain fuel from the fuel tank and carburettor float chambers.
•
Store in a dry and dust-free environment.
Technical data
Item №
63444
63445
Diameter of the intake opening
(
㎜
)
25
40
Diameter of the discharge opening
(
㎜
)
25 (1″)
40 (1,5″)
Max. flow rate
(
m³
⁄
h
)
8
15
Total water height
(m)
30
35
Suction height
(m)
8
Self-priming time (3 m)
(s)
≤ 80
Motor type
Air-cooled two-stroke engine
Engine power
1.25 kW / 7500
r
⁄
min
1.47 kW / 7000
r
⁄
min
Displacement
(cm³)
42.7
51.7
Ignition type
Electronic ignition (CDI)
Ignition system
L7T (LD)
Fuel used
Gasoline mixture (oil:gasoline = 1:25)
Tank capacity
(ℓ)
1,2
. mm
. mm
