https://www.XPOtool.com
Item 63444–63445
Page 6
The Tool Experts
08 2022-1
Adjusting the idle speed
•
The idle speed is set at the factory, but can be adjusted if necessary.
•
Turning the idle adjustment screw clockwise increases the engine speed, turning it anticlockwise
decreases the engine speed.
Notice!
The idle speed should be adjusted five minutes after starting the engine.
№
Name
1
Increasing the engine speed
2
Lowering the engine speed
Storing the engine
1.
Move the throttle to the slow speed position and let the
engine cool down for 2 or 3
min.
2.
Close the fuel tap.
3.
Press the stop button until the engine stops completely.
Caution!
Suddenly stopping the engine at high speeds
can cause engine damage, so avoid doing so except in
emergencies.
Maintenance
The life expectancy of the water pump depends on the quality of maintenance. It is recommended to
check your unit before and after use.
Maintenance after use
1.
Remove dirt and dust completely from the engine after operation.
2.
Check the engine to make sure there is no fuel leakage.
3.
Check each fastened part for possible looseness.
4.
If water mixed with soil and sand has been pumped, run fresh water through the pump to clean
the internal parts of the pump (suction and discharge pipes, etc.).
