background image

 

© by WilTec Wildanger Technik GmbH  

Item 61811 

Page 3 

 

http://www.WilTec.de

 

http://www.aoyue.eu 

  

11 2021

-1

 

http://www.teichtip.de

 

 

Introduction 

 
Thank you for purchasing this quality product.

 To minimize the risk of injury we urge that our clients 

take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.

 

Keep these operation instructions safe. 
 
 

Safety precautions 

 

  Always wear protective equipment (e.g., protective goggles) when working with power tools. 

Not wearing suitable protective equipment can lead to serious injuries or death. 

  Improper  use  of  power  tools  can  lead  to  loss  of  control,  serious  injury,  or  death.  Always 

ensure that you have a complete control of the power tool and that the work area is free from 
hazards before operating a power tool. 

  Make sure that your work area is tidy and adequately lit. An untidy or poorly lit workplace 

increases the risk of accidents. 

  Secure the door before cutting or drilling holes in it. Failure to secure it in place could result 

in unexpected movement of the door, loss of control of the power tool, and serious injury or 
death. 

  Missing or incorrectly attached anti-jump discs can lead to the door becoming detached from 

the rail and thus causing serious injuries. The installation of anti-jump discs is necessary for 
the safe operation of this sliding door system. When properly  installed, the discs hold the 
door securely attached to the door rail. 

  Improper handling of heavy objects (e.g., doors) can lead to  loss of  balance and serious 

injuries.  Always  make  sure  that  you  are  holding  the  item  securely  and  in  balance  before 
moving the item. Always wear safety shoes when lifting heavy objects. 

  Keep limbs, hair, and loose clothing or jewellery away from moving parts. If limbs (e.g., fin-

gers), hair, or objects on the body get caught in the moving parts, this can lead to injuries. 

  Closing sliding doors with your hand at the end of the door can result in your hand or fingers 

being trapped between the door and a solid object (e.g., another door, moulding, etc.), caus-
ing serious injury. Always use the door handle to close the door. 

 
 

Note!

  Use  of  excessive  force  to  open  and  close  the  door(s)  can  damage  the  item.  Always  hold  the 

handle and open and close the door(s) gently. 
 

 

Содержание 61811












Отзывы: