manualshive.com logo in svg

Wilson Electronics MAXX 2 Series, Руководство пользователя, Страница: 65 / 83

Поделиться
Скачать
Wilson Electronics MAXX 2 Series Скачать руководство пользователя страница 65

65

S

E C T I O N

7 - T

R O U B L E S H O O T I N G

One channel is not operating...

Imaging is off-center...

A chronic lack of bass energy...

Driver out or not playing after connec-

tions have been verified.

Check the interconnects from source.                      

Check the connections on the speaker cables, both

at the amplifier and speaker ends.  Watch espe-

cially for connectors touching each other.  

Check the Upper Range Signal Cables.  You may

have forgotten to connect them, or they may have

shorted or come loose during setup. 

Check your connections.  A connection to one of

the modules may have come loose.  When a tweet-

er or midrange driver is not working, or is out of

phase, the MAXX will not “image” properly.

Double check your connections for red-to-red and

black-to-black. 

Play music at a low level and listen to each driver

in each channel.  You may have a driver that is

not operating correctly.  If you find a driver that

is silent, please go to the “Driver Out” section of

this troubleshooting guide.

Check the input cable connections on your woofer

enclosure.  If one channel is out of phase (connec-

tions reversed), bass will be cancelled. 

Note:

Turn off your amplifier, and unplug it from the

wall.

If you have found a driver with no output, move

to the rear of this particular loudspeaker.

Using the appropriate Allen key, open the lower

aluminum door on the back of the upper

Содержание MAXX 2 Series




















































































Отзывы:

Нет отзывов