Wilson Electronics MAXX 2 Series, Руководство пользователя

Страница: 43 / 83

43
determine the location of the rear alignment spike referred to in the Group Delay Table.
The Group Delay Table contains the information for the rotation of the module within the
array. As mentioned, the alignment height is set by the Alignment Block. Determine the
alignment of the upper module as follows:
1. Repeat each step of this procedure on the left and right channels simultaneously.
2. Remove the Group Delay Table from Section 9 in this booklet and place it close by
for easy reference.
3. Make sure that you are in your intended listening position.
4. While sitting, have someone measure your ear height from the floor directly below
your ear. You should be relaxed in your chair, as you would be when listening to
music (see Figure 11).
5. Now measure the distance (on the floor) from the point on the floor below your ear
to the base of the loudspeaker, as shown in Figure 11.
S
E C T I O N
4 - G
R O U P
D
E L AY
F
I G U R E
1 1 - L
I S T E N I N G D I S TA N C E A N D D A R H E I G H T
M
E A S U R E E A R
H E I G H T F R O M
T H E F L O O R
L
I S T E N I N G
D
I S TA N C E