6
Need help?
www.WilsonElectronics.com
Tech Support 866-294-1660
Mon.- Fri. Hours: 7 am to 6 pm MST
8.
Connect the DT4G to a surge protected
AC power strip with at least a 1000
Joule rating. If your DT4G is working
correctly, the lights will be green.
If the lights are orange or red, see
the “Troubleshooting” section on
page 10.
NOTE:
0RGHUQHQHUJ\HI¿FLHQWGXDO
pane windows with coatings will
weaken the cellular signals as
they pass through because of a
PHWDOR[LGH¿OPDSSOLHGGXULQJ
manufacturing. If you have dual-
SDQHZLQGRZVZLWKHQHUJ\HI¿FLHQW
coatings, we recommend one
of the other mounting options if
your performance is not to your
satisfaction.
Installation Options
Outside Pole Mount Option
(Best Option)
1.
Select a location on the roof where the
Outside Antenna can be mounted on
a pole maintaining at least 20 feet of
vertical or horizontal separation from the
inside Desktop Antenna.
2.
Find an existing pole or obtain a
pole of 1 to 2 inches in diameter.
Mounting hardware to attach the pole
to the roof can be purchased from a
hardware store or you can purchase
a Wilson’s pole mount accessory kit,
part #901117. Install the pole in the
desired location.
3.
Using the hardware in Packet A, slide
both brackets onto U-bolt. Tighten nut
& washers set onto U-bolt.
Place the desktop signal
antenna directly beneath the
placement of the Outside
Antenna location
At least 20 feet of vertical
or horizontal separation
from the desktop antenna
is needed