manualshive.com logo in svg

Wilson Electronics 271265, Руководство по установке, Страница: 2 / 20

Поделиться
Скачать
Wilson Electronics 271265 Скачать руководство пользователя страница 2

1

Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660   

or email: [email protected]. Hours: 7 am to 6 pm MST.

2

Installation Instructions for the Following Wilson 

Electronics Signal Booster:

DB Pro™ Adjustable Gain In-Building Wireless  

800/1900 MHz Smart Technology   ™ Signal Booster

Model # 271265  

FCC ID: PWO271265      IC: 4726A-271265

The term “IC” before the radio certification number only signifies that Industry Canada 

technical specifications were met .

How it Works

Wilson Electronics signal boosters are bi-directional devices that 

deliver service levels consistent with what would be expected in areas 

of high cell network coverage .  The outside antenna will collect the cell 

tower signal and send it through the cable to the signal booster . The 

signal is then boosted and sent to the inside antenna . Your cell phone 

or data card then communicates with the improved signal . When the 

cellular device transmits, the signal goes through the inside antenna, 

is boosted by the signal booster and broadcasted to the cell tower 

through the outside antenna .

Inside this Package

DB Pro™ 

Signal Booster

AC/DC Power Supply

Accessories & Antenna Options

To purchase call Wilson Sales Department at: 800-204-4104

1 . 1900 MHz Yagi PCS Antenna (301124)*

2 . 800 MHz Yagi Cellular Antenna (301129)*

3 . Wide Band Directional Antenna  

    700 MHz - 2700 MHz (304411)

4 . Wide Band Panel Antenna 700-2700 MHz (301155)

5 . 75 Ohm Lightning Surge Protector (859988)

6 . 2-way splitter 700-2300 MHz (859959)

3

1

2

5

4

*Requires N-Male to F-Female adapter/converter (971128)

6

Содержание 271265





















Отзывы:

Нет отзывов