manualshive.com logo in svg

Wilson Electronics 271265, Руководство по установке, Страница: 17 / 20

Поделиться
Скачать
Wilson Electronics 271265 Скачать руководство пользователя страница 17

15

16

Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660   

or email: [email protected]. Hours: 7 am to 6 pm MST.

About Wilson Electronics

Wilson Electronics, Inc . has been a leader in the wireless 

communications industry for over 40 years . The company 

designs and manufactures signal boosters, antennas and related 

components that significantly improve cellular telephone signal 

reception and transmission in a wide variety of applications, both 

mobile and in-building . With extensive experience in antenna and 

signal booster research and design, the company’s engineering 

team uses a state of the art testing laboratory, including an 

anechoic chamber and network analyzers, to fine-tune antenna 

designs and performance . For its signal boosters, Wilson 

Electronics uses a double electrically insulated RF enclosure and 

cell tower simulators for compliance testing .

Wilson Electronics signal boosters feature patented Smart 

Technology   ™ that enables them to automatically adjust their 

power based on cell tower requirements .  By detecting and 

preventing oscillation (feedback), signal overload and interference 

with other users, these Smart Technology   ™ signal boosters 

improve network cell phone areas without compromising carrier 

systems . All products are engineered and assembled in the 

company’s 55,000-square-foot headquarters in St . George, Utah . 

Wilson Electronics has product dealers in all 50 states as well as 

in countries around the world .

Содержание 271265





















Отзывы:

Нет отзывов