WILSON AUDIO TuneTot, Руководство по установке и эксплуатации

Страница: 18 / 36

18
T u n e T o t I n s t a l l a t i o n a n d C a r e G u i d e
A u t h e n t i c E x c e l l e n c e ™
Do not overtighten.
Section 2�7—Port Plug
Unlike Wilson’s floorstanding loudspeakers, which are typically installed in
a relatively predictable environment with some distance from the room’s bound-
aries, TuneTot was designed to be installed into more acoustically hostile areas,
such as desktops, bookshelves, and counter tops.
TuneTot features an acoustically tune rear vented. Wilson engineers de-
termined that this configuration offers the best combination of low port noise
and optimized port contribution in the low frequency portion of the spectrum
of TuneTot. Occasionally, the combination of TuneTot’s proximity to a shelf or
counter top and a rear wall can reinforce this port energy and cause undesirable
reinforcement and nonlinearities in this portion of the bandwidth.
Wilson’s engineers have provided a solution for these types of installations.
TuneTot is shipped with two port plugs. These are located in TuneTot’s toolbox.
If the bass sounds integrated with the rest of the tonal spectrum, features
dynamic authority and transient speed in the midbass, there is little need to ex-
periment with the port plug. However, if the bass sounds bloated, “woolly” or
slow, these are symptoms of an excess of boundary reinforcement.
Use the following process experiment with the port plug, as well as the
method to safely install the plug.
QR Code to Wilson Parts Store
https://parts.wilsonaudio.com