WILSON AUDIO TuneTot, Руководство по установке и эксплуатации

Страница: 17 / 36

S e c t i o n 2 . 6 — C o n n e c t i n g T u n e T o t t o a n A m p l i f i e r
17
W i l s o n A u d i o S p e c i a l t i e s
final position, remove the film by following this procedure:
1. Ensure the speaker surface is room temperature before remov-
ing the protective film.
Note: Removing the protective film when the speaker surface is cold can
damage the paint surface.
2. Slowly remove the film from the top down, large sections at a
time, gently pulling the film downward and outward.
Note: Tearing the film aggressively can damage the paint.
3. Take care in removing the protective film near edges and cor-
ners to prevent paint damage in these areas.
4. The protective film should not be left on the painted surface
for extended periods of time nor exposed to heat sources and
direct sunlight.
Section 2�6—Connecting TuneTot to an Amplifier
High quality “five-way” binding post connections are provided to facilitate
connecting TuneTot to your amplifier. Several different types of speaker-cable
hardware are compatible with the post, including spades and banana-style con-
nectors. Attach the main output from the amplifier to the binding posts located
on the bottom rear of the TuneTot. Use your fingers to tighten the binding posts.