WILSON AUDIO TuneTot, Руководство по установке и эксплуатации

Страница: 16 / 36

16
T u n e T o t I n s t a l l a t i o n a n d C a r e G u i d e
A u t h e n t i c E x c e l l e n c e ™
2. Lay a 10” digital level, such as the Husky, horizontally on the
top plane of TuneTot. Check the level.
3. You may rotate the spike tips in place by hand. Lengthen the
appropriate spike or spikes on the lower side until TuneTot is
level. You may rotate the spike tips in place by hand.
4. Adjust the Adjustable spikes until TuneTot is level side-to-side,
and providing a solid, level mount with no rocking.
5. Recheck to make sure that TuneTot is still positioned for cor-
rect time domain.
6. Using the supplied 9/16” wrench, and taking care to avoid mov-
ing TuneTot out of position, tighten the nuts installed on the
Adjustable spike by sliding the wrench in the space beneath
TuneTot. Tighten the nuts such that they are locked and secure
against the bottom of the cabinet. Do not overtighten.
Section 2�5—Removing the Protective Film
To protect the finish of TuneTot during final manufacture, shipment, and
setup in your listening room, we have applied a removable layer of protective film
over the finish. We recommend that this film be left in place until the speakers
are in their final location in your listening room. Once you have determined their