background image

English

Installation and operating instructions Wilo-DrainLift XL

25

Please state all the information on the system name plate when ordering spare parts.

5.3 Scope of delivery

Sewage lifting unit, including:
1  Switchgear DrainControl PL2/0.3-12.0 A (3~ 400 V) with 1.5 m mains cable and 

32 A CEE plug, pre-installed 

1  Breakdown barrier in the housing with 1 m cable, pre-installed
1  Level sensor 0-1 mwc, 10 m cable
1  Inlet seal DN 150 (for pipe Ø 160 mm)
1  Keyhole saw Ø 175 for inlet DN 150
1  DN 150 hose section with clamps for DN 150 inlet connection
1  Hose section PVC Ø 50 mm with hose clips for connecting the suction line to the dia-

phragm hand pump or an inlet DN 50

1  Collar for ventilation connection, DN 70
1  Set of fixation material 
1  Flange piece DN 80/100 with flat gasket, flexible hose section, hose clips, bolts and 

nuts for connecting the discharge pipeline DN 100

1  Installation and operating instructions

5.4 Accessories

Accessories must be ordered separately. For a detailed list and description, see the cata-
logue/price list.
The following accessories are available:

• Flange piece DN 80, DN 80/100 (1 pc. DN 80/100 already included in scope of delivery), 

DN 100, DN 150 for connecting the slide valve on the intake or pressure side to the piping

• Connection set for inlet DN 100 (keyhole saw Ø 124, inlet seal)
• Gate valve (DN 80) for discharge pipe
• Gate valve (DN 100, DN 150) for inlet pipe
• Diaphragm hand pump R 1½ (without hose)
• 3-way cock for switching over to the manual suctioning from the pump sump/tank
• Alarm switchgear
• Horn 230 V / 50 Hz 
• Flash light 230 V / 50 Hz 
• Signal lamp 230 V / 50 Hz

Dimensions (width/height/depth)

[mm]

835/955/1120

Diagonal dimension

[mm]

1300

Net weight

[kg]

108

Pressure connection

[DN]

80

Inlet ports

[DN]

50, 100, 150

Ventilation

[DN]

70

*

1)

 Improper system and pipe installation, as well as impermissible operation, can increase the 

acoustic emissions.

CE

WILO SE Dortmund

Nortkirchenstr. 100, 44263 Dortmund, Germany

09

EN 12050-1 

Faeces lifting unit for building DN 80

Lifting power

- See pump curve

Noise level

- TRS

Corrosion protection

– coated, or corrosion-resistant materials, inox/composite

5.2

Technical data

DrainLift XL

2/10

2/15

2/20

2/25

Содержание DrainLift XL


























Отзывы: