manualshive.com logo in svg

Wilo DrainLift SANI-M Series, Инструкция по установке и эксплуатации

Поделиться
Скачать
Wilo DrainLift SANI-M Series Скачать руководство пользователя страница 19

Installation and electrical connection

en

Installation and operating instructions Wilo-DrainLift SANI-M

19

4

3

Fig. 6: 

Ventilation connection

3

Ventilation connection

4

Pressure connection

‡

Lifting unit is properly installed.

‡

Ventilation line is properly installed.

1. Attach HT double socket to open ventilation connection piece.

2. Insert ventilation pipe into HT double socket.

▶ Lifting unit installed. Connect a diaphragm hand pump to the connection for the

emergency drain as required.

6.4.9

Installation of a diaphragm hand
pump

NOTICE
Do not connect inlet to the emergency drain!

The collection reservoir is pumped out via the emergency drain for inspection work
or in the event of an accident. Do not connect inlets to the emergency drain! The
collection reservoir cannot be drained in case of emergency otherwise!

The collection reservoir must be manually pumped out if maintenance work is carried
out or if the lifting unit malfunctions. It is recommended to install a diaphragm hand
pump for this purpose.

CAUTION! If the lifting unit malfunctions, there is backflow into the inlet and the
collection reservoir can burst! Shut off the inlet and drain the collection reservoir.

4

7

Fig. 7: 

Connection of diaphragm hand pump

4

Pressure connection

7

Emergency drain connection

Observe the following points when installing a diaphragm hand pump:

ƒ

Select an installation height which is optimal for operation.

ƒ

Connect the diaphragm hand pump to the emergency drain (lowest point, almost
complete drain possible).

ƒ

A hole saw 30 mm (1.3 in) is required to open the drain connection.

ƒ

Connect the pressure pipe downstream of the gate valve on the pressure side.
Alternatively, the connection can be made via a pipe loop directly to the sewer.

ƒ

All connections must be completely tight!

ƒ

Observe the installation and operating instructions for the diaphragm hand pump!

6.5

Electrical connection

DANGER
Risk of death due to electrocution!

Improper conduct when carrying out electrical work can lead to death due to electric
shock! Electrical work must be carried out by a qualified electrician in accordance
with the locally applicable regulations.

6.5.1

Fuse on mains side

Circuit breaker

The size and switching characteristics of the circuit breakers must conform to the rated
current of the connected product. Observe local regulations.

Содержание DrainLift SANI-M Series

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды