Installation and electrical connection
en
Installation and operating instructions Wilo-DrainLift SANI-M
13
Only remove the outer packaging at the place of use to ensure that the lifting unit is
not damaged during transport. Use tear-proof plastic bags of sufficient size to package
used lifting units for transport in a leak-proof manner.
ƒ
Two grip pockets are provided on the collection reservoir for transport.
ƒ
Never pull the device by the connection cable!
ƒ
It is recommended to deploy two persons for the transport.
ƒ
Observe packaging regulations:
–
Impact-resistant
–
Ensure the device is properly fixed in place.
–
Protect it against dust, oil and moisture.
5.3
Storage
DANGER
Danger due to fluids hazardous to health! Disinfect the lifting unit!
If the lifting unit is used to pump fluids that are hazardous to health, decontaminate
the lifting unit after dismantling and before carrying out any other work! There is a
risk of fatal injury! Observe the specifications in the work regulations! The operator
must make sure that the personnel have received and read the work regulations!
CAUTION
Total damage due to moisture ingress
The ingress of moisture into the connection cables damages the cable and motor!
Never immerse open ends of the connection cables in fluid. Seal them in a watertight
manner during storage.
Newly supplied lifting units can be stored for one year. For longer storage periods, con-
tact customer service.
When storing the pump, please note the following points:
ƒ
Place the lifting unit securely on a firm surface and secure it against slipping and fall-
ing over!
ƒ
Permitted storage temperature: -15 ... 60 °C (5 ... 140 °F), max. humidity: 90 %, non-
condensing.
We recommend frost-proof storage. Storage temperature: 5 ... 25 °C (41 ... 77 °F),
relative humidity: 40 ... 50 %.
ƒ
Drain the collection reservoir completely.
ƒ
Coil up connection cables and attach to the motor.
ƒ
Seal open ends of the connection cables and plugs in a watertight manner.
ƒ
Store switchgear according to the instructions.
ƒ
Tightly seal all open connections.
ƒ
Do not store the lifting unit in spaces where welding work is carried out. The result-
ing gases or radiation can corrode the plastic and elastomeric parts.
ƒ
Protect the lifting unit from direct sunlight and heat. Extreme heat can cause dam-
age to the plastic parts!
ƒ
Elastomeric parts are subject to natural brittleness. Contact customer service if stor-
age is required for more than 6 months.
6
Installation and electrical con-
nection
6.1
Personnel qualifications
ƒ
Electrical work: qualified electrician
Person with appropriate technical training, knowledge and experience who can
identify and prevent electrical hazards.
ƒ
Installation/dismantling work: trained specialist in plant technology for sanitary fa-
cilities
Fixation and buoyancy safeguards, connection of plastic pipes
6.2
Installation types
ƒ
Floor-mounted installation in buildings
ƒ
Concealed floor installation in pump chambers outside of buildings
6.3
Operator responsibilities
ƒ
Observe locally applicable accident prevention and safety regulations.
