Wilo Control MS-L, Инструкция по установке и эксплуатации

Страница: 35 / 40

en
Installation and operating instructions • Wilo-Control MS-L • Ed.02/2022-05 35
NOTICE
• Depending on the system impedance and the maximum connections/
hour of the connected consumers, voltage fluctuations and/or drops
may occur.
• When using shielded cables, attach the shielding to the earth rail on
one side of the switchgear!
• Always have connection carried out by a qualified electrician!
• Observe the installation and operating instructions for the connected
pumps and signal transmitters.
1~230 V, 2-pole, direct starting
Power in kW System impedance in ohm Connections/h
1.5 0.4180 6
1.5 0.3020 24
1.5 0.2720 30
2.2 0.2790 6
2.2 0.1650 24
2.2 0.1480 30
3~400 V, 2-pole, direct starting
Power in kW System impedance in ohm Connections/h
2.2 0.2788 6
2.2 0.2126 24
2.2 0.1915 30
3.0 0.2000 6
3.0 0.1292 24
3.0 0.1164 30
4.0 0.1559 6
4.0 0.0889 24
4.0 0.0801 30
3~400 V, 4-pole, direct starting
Power in kW System impedance in ohm Connections/h
2.2 0.2330 24
2.2 0.2100 30
3.0 0.2090 6
3.0 0.1380 24
3.0 0.1240 30
4.0 0.1480 6
4.0 0.0830 24
4.0 0.0740 30