zh-CHS
Transport and storage
64
WILO SE 2020-10
Fig. 8:
Attaching the pump
load-bearing elements are loaded vertically. If necessary, use a lifting arm, to which
the lifting gear can be vertically attached.
ƒ
Ensure that the load is lifted vertically!
ƒ
Prevent the suspended load from swinging!
5.2.2
Attaching the unit
Fig. 9:
Attaching the unit
ƒ
Comply with applicable national safety regulations.
ƒ
Use legally specified and approved lifting gear.
ƒ
Select the lifting gear based on the prevailing conditions (weather, attachment
point, load ...).
ƒ
Only attach the lifting gear to the attachment point. Fix in place with a shackle.
ƒ
Never feed the lifting gear over or through transport lugs without protection.
ƒ
Never feed the lifting gear over sharp edges without protection.
ƒ
Use lifting equipment with sufficient bearing capacity.
ƒ
The stability of the lifting equipment must be ensured during operation.
ƒ
When using hoisting gears, ensure that a second person is present to coordinate the
procedure if necessary. For example, if the operator's field of vision is blocked.
ƒ
The safety and efficiency of the lifting gear is best guaranteed when all load-bearing
elements are loaded vertically. If necessary, use a lifting arm, to which the lifting
gear can be vertically attached.
ƒ
Ensure that the load is lifted vertically!
ƒ
Prevent the suspended load from swinging!
5.3
Storage
注意
Improper storage can lead to damage to the equipment.
Damage caused by improper storage is not covered by the guarantee or warranty.
ƒ
Requirements at the storage location:
–
dry
–
clean
–
well-ventilated
–
free from vibrations
–
free from humidity
–
free from rapid or extreme changes in temperature
ƒ
Store the product somewhere safe against mechanical damage.
ƒ
Protect the bearings and couplings from sand, gravel and other foreign objects.
ƒ
Lubricate the unit to prevent rust and bearing seizing.
ƒ
Manually rotate the drive shaft several times once a week.
Содержание Atmos TERA SCH 150-230
