manualshive.com logo in svg

Wilo Atmos GIGA-B, Инструкция по установке и эксплуатации

Поделиться
Скачать
Wilo Atmos GIGA-B Скачать руководство пользователя страница 49

Installation

en

Installation and operating instructions Wilo-Atmos GIGA-I/-B

49

NOTICE
Simplify subsequent work on the unit!

• To ensure the entire unit does not have to be emptied, install shut-off valves up-

stream and downstream of the pump.

If need be, the necessary non-return valves are to be provided.

Condensate drainage

ƒ

When using the pump in air conditioning or cooling systems:
The condensate that forms in the lantern can be drained specifically via an existing
drilled hole. A drain pipe can also be connected to this opening and a small amount
of escaping liquid can be drained off.

ƒ

The air vent valve (Fig. XXIX/XXX, item 1.31) must always face upwards.

Installation positions

Atmos GIGA-I

Permitted/impermissible installation positions

ƒ

Installation position:
Only vertical installation is permitted.

Atmos GIGA-B

Permissible installation positions

NOTICE

Install monobloc pumps of the Atmos GIGA-B series on adequate foundations or
mounting brackets (Fig. 2).
The motor must be supported from a motor power of 18.5 kW. (See installation ex-
amples Atmos GIGA-B).

Pump housing and motor must be installed underneath. Suitable supports from the
Wilo accessories range can be used for this purpose.

When installing the motor in a vertical position, the pump housing foot and motor
housing foot must be screwed on. This must be done stress-free.

Unevenness between motor and pump housing feet must be levelled out for stress-
free installation.

NOTICE

The motor terminal box must not face downward. If necessary, the motor or motor
impeller unit can be rotated once the hexagon head screws have been loosened.
While rotating the motor or motor impeller unit, ensure that the housing O-ring seal
is not damaged.

Installation examples Atmos GIGA-B:

Содержание Atmos GIGA-B





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды