manualshive.com logo in svg

Wilo Atmos GIGA-B, Инструкция по установке и эксплуатации

Поделиться
Скачать
Wilo Atmos GIGA-B Скачать руководство пользователя страница 47

Installation

en

Installation and operating instructions Wilo-Atmos GIGA-I/-B

47

Motor power [kW]

Measuring surface sound-pressure level Lp, A [dB(A)] 

1)

2900 rpm

1450 rpm

75

77

74

90

77

72

110

79

72

132

79

72

160

79

74

200

79

75

250

85

-

1)

 Spatial mean value of sound-pressure levels on a square measuring surface at a dis-

tance of 1 m from the surface of the motor

Table 3: 

Anticipated noise levels (50 Hz)

7

Installation

7.1

Personnel qualifications

ƒ

Installation/dismantling work: The installation/dismantling must be carried out by a
qualified technician who is trained in the use of the necessary tools and fixation
materials.

7.2

Operator responsibilities

ƒ

Observe national and regional regulations!

ƒ

Observe locally applicable accident prevention and safety regulations of profes-
sional and trade associations.

ƒ

Provide protective equipment and ensure that the protective equipment is worn by
personnel.

ƒ

Observe all regulations for working with heavy loads.

7.3

Safety

DANGER
Risk of fatal injury due to lack of protective devices!

Due to missing protective devices of the terminal box or in the range of the coup-
ling/motor, electric shock or contact with rotating parts can lead to life-threatening
injuries.

• Before commissioning, safety devices such as coupling covers that were removed

must be reinstalled!

DANGER
Risk of fatal injury from falling parts!

The pump itself and pump parts can be extremely heavy. Falling parts pose a risk of
cuts, crush injuries, bruises or impacts, which can be fatal.

• Always use suitable lifting equipment and secure parts against falling.

• Never stand underneath a suspended load.

• During storage and transport, as well as before all installation and assembly work,

ensure that the pump is in a safe position and standing securely.

WARNING
Hot surface!

The entire pump can become very hot. There is a risk of burns!

• Allow the pump to cool down before commencing any work!

WARNING
Risk of scalding!

At high fluid temperatures and system pressures, allow the pump to cool down first
and then depressurise the system.

Содержание Atmos GIGA-B





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды