Wills Wing Fusion 141, Руководство по эксплуатации для владельца

Страница: 17 / 68

— 9 —
Fusion Set-Up Procedure
The Fusion has been specially designed to set up quickly and easily either on the control bar or flat on
the ground. We will first cover the steps for setting up on the control bar.
1. Lay the glider on the ground, with the bag zipper up, with the nose into the wind.
2. Undo the zipper, remove the battens, remove the protective pad at the rear wire station on the keel,
and remove the control bar bag. Newer gliders may have a pair of neoprene protective socks over
the rear wire junction and the end of the keel instead of a pad.
3. Unfold the control bar legs.
a. If the glider is equipped with a folding basetube:
i. Straighten the fold in the folding basetube.
ii. Preflight the folding basetube center hardware at this time, checking that the nuts
and coil spring pins are secure, and that the tangs are straight and in good condi-
tion.
iii. Slide the basetube center sleeve over the center joint until it is positioned between
the button spring pins. (Note: If you plan to clamp instruments to the basetube
center, position the center sleeve so that one button passes through the hole near
one end of the sleeve, which will secure the sleeve against rotation.)