Installation Guide & User Manual
TeleTalker
®
Model TEL 040
Williams Sound
®
Helping People Hear
12
Step 4:
Hold the telephone next to the wall-phone
jack and plug the line cord into the jack,
leaving any slack in the base unit cavity.
Then push the phone against the mount-
ing studs so the studs are hooked into the
upper and lower keyhole slots of the
phone. Slide the phone down until it
snaps into place.
(see fig. 7)
Step 5:
Check for a dial tone. If you can’t hear a
dial tone, see
In Case Of Difficulty
, page
18.
Note:
To remove a wall-mounted telephone, slide
the phone up and pull it slightly away
from the wall. Disconnect the line cord by
squeezing the clip on the modular plug
and pulling it from the jack.
Wall Mount
Bracket
Short Wall Cord
Studded Wall
Phone Plate
fig. 7:Wall Installation
