Williams Sound
®
Helping People Hear
11
TeleTalker
®
Model TEL 040
Installation Guide & User Manual
Step 3:
Lift the handset and check for dial tone. If
you don’t hear a dial tone, see
In Case Of
Difficulty
, page 18.
Note:
To disconnect, squeeze the clip on the
plug and pull it out from the jack. Remove
the Power Pack plug from telephone.
For Wall Plate Installations
If you prefer, the TeleTalker can also be mounted on
a studded wall phone plate. If you don’t have a
phone plate installed, talk to your phone company
or local phone products store.
Step 1:
Clip the plastic wall mounting bracket
(included) into bottom of the TeleTalker
base unit.
(see fig. 7 on following page)
Make sure the tabs snap in securely. This
will make the base unit level with the wall.
Step 2:
Reverse the handset hanger found in the
handset cradle to prevent the handset
from falling.
Step 3:
Plug the short line cord into the jack on
the top of the telephone and thread the
line through the channel to the cavity on
the back of the base unit.
