Williams Sound SoundPlus WIR SYS 90 ADV, Руководство по установке и Руководство пользователя

Страница: 9 / 16

9
Using the Optional WIR TX9 Slave Emitter for Additional Coverage
For larger facilities, additional emitter panels can be used to increase the overall coverage area. In these
cases, we recommend using the WIR TX9 slave emitter in tandem with the WIR TX90. The WIR TX90 can
drive multiple WIR TX9 emitters at one time. Each TX9 emitter will require its own power supply.
To TX9 Emitter
Baseband
Input
Baseband
Output
WIR TX9 Emitter (Rear) WIR TX90 Transmitter (Rear)
Figure 11: Connecting a WIR TX9 Emitter to a WIR TX90 Transmitter
To TX9 Emitter To Second TX9 Emitter To Additional Emiters To additional Emitters
WIR TX9 Emitter #1 (Rear) WIR TX90 Transmitter (Rear) WIR TX9 Emitter #2 (Rear)
Baseband
Input
Baseband
Output
Baseband
Input
Baseband
Output
Baseband
Output
Baseband
Output
Figure 12: Chaining multiple WIR TX9 Emitters Together
To add a second WIR TX9 emitter panel to the WIR TX90 transmitter, repeat the process above (the
WIR TX90 transmitter has two baseband output jacks).
Note: The WIR TX9 emitter panels can be “chained” together if needed for unlimited coverage
area. Each WIR TX9 emitter will require its own power supply. See Figure 12 below.