Williams Sound SoundPlus WIR SYS 90 ADV, Руководство по установке и Руководство пользователя

Страница: 4 / 16

4
u
Determine Coverage Area
Determine the coverage area needed for the seating area. When using the WIR TX90 transmitter with the RX22-
4 receiver, in single channel mode, the WIR TX90 can achieve a coverage area of 28,000 ft2 (2,600 m2). In four
channel mode, the WIR TX90 divides its power among the four signals to achieve a coverage area of 11,000 ft2
(1,022 m2).
NOTE: The coverage area will vary depending on the sensitivity of the infrared receiver being
used. The following diagram illustrates coverage area when using a RX22-4, RX15-2, or RX18 receiver
with a single WIR TX90 transmitter in single channel mode.
0
0
-10
-20
-30
-40
-50
-60
-70
-80
-90
10
20
30
40
50
60
70
80
90
10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160
FEET
FEET
RX22-4 Receiver
RX18 Receiver
RX15-2 Receiver
Receiver Coverage Area with
TX9 or TX90 Transmitter in
Single Channel Mode
Figure 2: Maximum range when using the RX22-4, RX15-2, or RX18 Receiver
These patterns are the direct radiation pattern. The infrared radiation does not drop to zero outside the illustrated
patterns; it decreases. It still may be useable at a greater distance, depending on the receiver sensitivity and the
reflective characteristics of the room.
Reflections of the infrared light from walls, ceilings, and floors may change these patterns.
Important: Remember to point the transmitter towards the listening audience!
Remember: opaque objects block infrared light. Thus, the transmitter cannot be concealed behind opaque walls,
curtains, etc.