8
SETTING UP YOUR DUAL-BREW COFFEE MAKER WITH CAPSULE ADAPTER
WARNING:
Before brewing, the water should be filled to the MIN line.
To avoid damage to your coffee maker, never operate when the water tank is empty.
Grasp the removable water tank using the designated grips. Lift the water tank up and remove it from
the base of the unit. (See Figure 1)
Remove the lid and fill the water tank to the MAX indicator line with cold water.
NOTE:
Never fill the water tank past the MAX indicator line or below the MIN indicator line.
IMPORTANT:
For optimal flavor, distilled water is recommended.
Firmly place the lid and tank back and secure.
Select the desired height for the drip tray, depending on the size of your vessel.
Place the empty cup, mug or tumbler in position on the drip tray cover.
Pull the adapter compartment’s front tab up to unlock and lift the lid.
Choose the capsule adaptor and add capsule into it. Press down on the capsule until it is flush with the
adapter. You will hear a “puncture sound” as the needle penetrates the capsule.
With the handle facing front, place the capsule adapter into the adapter compartment. Slide the
adapter handle into the grooves at the front of the coffee maker.
Press the adapter compartment’s lid down firmly. An audible click will indicate the lid is locked in place
and the capsule top is punctured.
Plug the coffee maker into a 120V AC electrical power outlet.
To select the brew size (6, 10 or 15 oz.), press the Size button until the indicator light illuminates the
desired size. Then press the Capsule button to begin the brew cycle.
The red PREHEAT indicator light will begin to flash as the water begins to heat.
When the water has reached the optimum temperature, the preheat light will go out and the blue BREW
light will illuminate.
The pump will then activate and coffee will begin to stream through the nozzle.
To interrupt the brewing cycle at any time, press the Capsule button. Then remove the plug from
the power outlet.
At the end of the cycle, the coffee maker and all indicator lights will automatically turn off.
Allow unit to cool before removing the used capsule to discard.
SO-316452_60065 OK Single Serve CM IM r11.indd 8
2019-08-09 2:43 PM