7
BREWING INSTRUCTIONS
The drip tray adjusts to two heights to accommodate shorter cups and mugs or taller travel mugs and tumblers.
For taller vessels, make sure the drip tray and cover are in the lower position.
(See Figure 2) When brewing a smaller cup, raise the drip tray to the upper level to avoid splatter. (See Figure 4)
ADJUSTING THE DRIP TRAY
Grasp the drip tray and cover from the base. (See Figure 2)
Holding both pieces, slightly tilt upward and slide out from the unit. (See Figure 3)
Using the tab on the back of the drip tray as your guide, again slightly tilt both pieces upward and glide
the tabs into the upper slots on the body. (See Figure 4) Press down on the drip tray to make sure it is
firmly and properly attached before placing the cup or mug on top.
Figure 4
Figure 2
UPPER
SLOTS
Figure 3
SO-316452_60065 OK Single Serve CM IM r11.indd 7
2019-08-09 2:43 PM
