25
Annotation Pro & Annotation Pro Plus
3. Select DHCP or STATIC.
• If
DHCP
is selected, IP Address, Netmask, Gateway and Nameserver are assigned automatically.
• If
STATIC
is selected, you must make entries for IP Address, Netmask, Gateway and Nameserver. (
This is the
default setting.)
Consult with your IT administrator if you need help with these entries.
4. Select
Apply Settings
to finish the network configuration.
5. Exit the menu system.
Configure TFTP Settings
The Annotation Pro TFTP feature gives you the ability to save and retrieve images using the TFTP protocol. To save
a file using TFTP, you must first install a TFTP server on the computer which will receive the file(s). You will need the
IP address of the computer where TFTP is installed. Make sure your firewall does not block access to your TFTP
server.
The following steps are required to allow the Annotation Pro to communicate with the TFTP server.
1. Activate the menu system. The Main Menu appears
.
2. Select the
Network
option. The Network Menu appears
.
3. Select the
TFTP
option. The TFTP menu appears.
TFTP menu
4. Enter the
IP address
of the TFTP server. Check with your IT administrator if you do not know the IP address.
5. Enter the
Port number.
This is usually port 69. Check with your IT administrator if you are unsure.
6. Exit this dialog by selecting Previous Menu.
Configure Windows Share (SMB) Settings
The Annotation Pro Windows Share (SMB) feature gives you the ability to save and retrieve images using the SMB
protocol. To save a file using SMB, you must first activate a Share on a server with the SMB protocol running.
The setup dialog requires a Server and Share name. If the Share is password protected, you will need the username
and password. Make sure your firewall does not block access to your SMB share.
The following steps are required to allow the Annotation Pro to communicate with SMB share.
1. Activate the menu system. The Main Menu appears
.
2. Select the
Network
option. The Network menu appears
.
