18
Annotation Pro & Annotation Pro Plus
When you locate and select the name you wish to assign, it will move to the center of the list, where it will be
highlighted. The new device type is now assigned. Device types which cannot be selected are in white.
Device Select menu
When a
?
button is selected, a screen with further information about that device type will be displayed.
If a device type that is used for communicating with other systems is selected, an arrow button will replace the ?
button. Selecting that arrow button will activate the control port’s submenu
.
You can return to the Serial Ports menu to make further changes by selecting the Return button, or by selecting Input
Devices and then selecting Serial Ports.
3.
(Optional)
Select the device type name you wish to change.
This method is only recommended for those with
more extensive experience in assigning device types.
When the device type name, instead of the arrow to its right, is activated, the device type will change without having
to display the submenu. Each time the name is selected, it causes a different device type to appear. The list of
devices available using this method is an abbreviated version of the list in the Device Select dialog.
A click on the right side of the name moves forward one device. A click on the left side of the name moves
backward one device. Keep clicking until the device type you desire is displayed. It will be assigned permanently
when the Annotation Pro is rebooted.
If you are using the keyboard to select, it moves backward through the list only.
NOTE: If you are designating a port for use with another system, you will need to set COMM Port parameters before
exiting the menu system. See the Setting COMM Port Parameters section.
4. Exit the menu system and recycle the power on the Annotation Pro.
5. The Annotation Pro must either be rebooted for the new device type assignments to be made permanent,
or
you
can return to the Serial Ports dialog and select the numbered red box next to the new assignment to activate the
device immediately
.
Viewing a USB Device Type
1. Activate the menu system. The Main Menu appears.
2. Select
Devices.
The Devices menu appears
.
