WILLETT 430, Руководство по обслуживанию

Страница: 119 / 207

430 Ink Jet Printer Service and Maintenance Manual
102
Issue 2
Part No. 306-0430-102
Print Menu
Print Menu Menu Option Function
Print Enable Opens the Print Control menu. The PRINT option can be toggled
between Enable and Disable .
Manual Print Printing is normally triggered from an external device,
i.e. photocell or internal timer. Use manual print to print one copy
of the selected message when the print command is given. This
feature can be used to check the printer operation whilst off-line.
The photocell must be uncovered to use manual print.
Continuous Print The message is printed repeatedly without an external trigger.
Opens the
Continuous print dialogue. Continuous mode can be
toggled between Off , SE Mode and Time Mode . SE mode delay
and Time mode delay can be individually adjusted between 1 and
10000 pulses.
SE mode uses external shaft encoder pulses to set the gap
between the start of each print.
Time Mode uses internally generated pulses to set the gap
between the start of each print.
Print Ack Control Sends a signal to an external control system normally via
COMM1. Same as the
Print acknowledge on the Print Control
menu. The Print acknowledge option can be set to Off , After
Comp , After Prin or After both . The Print ACK code option can
be set between 1 and 255.
Password Menu
Password Menu Menu Option Function
Enter Password Opens the Enter Password dialogue, together with the
Current password level . The user is prompted to enter a
password to change to a different password level.
Clear Password The password is cleared for the current access level and
access is returned to password level 0.
Set Password for level 1 Opens the New Password dialogue. The user is prompted to
enter a new password for level 1.
Set Password for level 2 Opens the New Password dialogue. The user is prompted to
enter a new password for level 2.
Set Password Levels Opens the Change Password level menu. This has options
for the Quick Screen and each of the menus. When an option
is selected, a further dialogue appears with options to
change the password level for each option available in the
menu. The password levels can be set in the range 0 to 3,
where level 0 has no password protection.
This option is for use by trained service personnel only.