7
© Wilks-USA
TX750 / TX750i
Operation and Use
Warning:
The engine is not filled with oil. It is necessary to fill the unit before starting the engine. The engine
will not product a spark unless sufficient oil is inside.
Caution:
Do not run the engine with high or low oil level as this can cause engine damage.
Caution:
Only use unleaded gasoline.
Caution:
Avoid damaging your hose by ensuring it does not touch the hot exhaust during or after use.
Caution:
Avoid damaging your pump by ensuring the water supply is clean and free of any foreign objects
Caution:
Inlet water temperature must not exceed 40ºC and 20 PSI
Caution:
Never let the appliance operate for more than 2 minutes with the spray gun in the closed position
Caution:
Never operate the pressure washer with repeated and rapid on/off movements of the trigger
WARNING: The engine is not provided with oil. It is necessary to fill the unit before starting the
engine.
Fig.08
Engine Oil. (fig.08-09) Warning:
The engine is not provided
with oil. It is necessary to fill the unit before starting the engine.
The engine has two oil fill points at the front and back of the
engine. Remove the desired cap and fill with the engine oil
specified to the upper level mark or base of threads.
Fig.09
Pump Oil. (fig.10) Warning:
The YELLOW pin must be
removed from the RED
breather plug before use.
High Pressure Connection
(fig.11-14):
Connect the
high pressure hose A to the
units high pressure outlet.
Fig.10
Fig.11
Connect the High Pressure
Hose to the Trigger B:
Insert
the lance C into the gun
end. Press firmly and twist
the coupling into the locked
position.
Fig.12
Connecting the Hose:
Connect the hose to the
water inlet connector (MAX.
20PSI, MAX 40°C Temp)
and turn the water on
completely.
Fig.14
Inserting a Nozzle (fig.13):
To insert a nozzle, pull back
the locking collar at the end
of the lance, insert nozzle
and release the collar. This
will lock the nozzle in place.
Ensure the nozzle is inserted
correctly. If not it can fly
out and injure personnel or
damage property.
Fig.13
