Wilks USA TX750 Скачать руководство пользователя страница 5

Страница: 5 / 22

TX750 / TX750i

•

Do not attempt to modify the product In any way.

•

To ensure good operating conditions, range regular service from an authorized agent.

•

Only use replacement parts supplied by the manufacturer.

•

Only use fresh, clean and good quality fuel in the engine.

•

Never operate the engine without oil.

•

Never refuel in close proximity to naked flames, sparks or other sources of ignition e.g. cigarettes.

•

Do not refuel when the engine it hot.

•

Wipe up and correctly dispose of any fuel spillage immediately within public guidelines.

•

Move away from the refuelling areas before restarting the engine. Store fuel for short periods only in a suitable

container away from heat and direct sunlight.

•

Clean the pressure washer thoroughly after each use.

•

Regularly check external nuts and fixings to ensure vibration caused by normal caused y normal use has not loosened

them. Remove the spark plug ignition lead (HT Lead) from the back of the spark plug and position the lead to avoid

accidental reconnection.

•

Store the machine in a secure dry location out of reach of children.

•

Empty the fuel lank before storage.

Maintenance and Storage

Getting to Know Your Petrol Washer

Fuel Tank

Lance Nozzle End

Wheels

Hose Reel (TX750i)

Gun/Lance

Spare Hose

Nozzle Storage

Lance Extension

Lower Frame

Detergent Tank

Содержание TX750























Результаты поиска

Содержание TX750

Отзывы:

Похожие инструкции для TX750

Бренды по названию

Популярные бренды

Wilks USA TX750, Руководство пользователя

Результаты поиска

Содержание TX750

Отзывы:

Похожие инструкции для TX750

Бренды по названию

Популярные бренды