Wilkes WEB2, Руководство пользователя, Страница: 31 / 44

31
Deleting a Single Learning Key
This process returns the key to its original program-
ming for the mode you select. You can also delete
learned programming by teaching a different function
to the key (see “Programming a Learned Key”).
NOTE: If more than 15 seconds pass between key
presses, the remote exits programming.
1. Press and hold SETUP until the last-selected
mode key blinks twice, then press 9 7 6.
2. Press a mode key once (i.e., VCR, DVD, AUD,
TV, or STB ). The LED on the selected mode
key will blink once.
3. Press the key containing the learned function
to be deleted twice. The active MODE key will
blink twice.
4. Repeat steps 2 through 3 for another key or
press and hold SETUP to exit programming.
Deleting All Learned Keys in a Specific Mode
NOTE:
If more than 15 seconds pass between key
presses, the remote exits programming.
1. Press and hold SETUP until the last-selected
mode key blinks twice, then press 9 7 6.
2.
3. Press a mode key twice (i.e., VCR, DVD, AUD,
TV, or STB ) to clear all the learned keys for
that mode. The mode key LED blinks twice.
4. Repeat step 2 for another mode or press and
hold SETUP to exit programming.
PROGRAMMING CHANNEL CONTROL LOCK
By default, the remote control’s channel-control
capabilities are locked to the set-top box. The affect-
ed keys* are
1
through
0, CH+, CH-,
and
LAST
. This
will guarantee that you do not inadvertently change a
channel on your TV or VCR. However, you can deacti -
vate this feature to allow full access to these keys in
the
TV
and
VCR
modes.
*NOTE: This feature does not affect the AUD mode.
Unlocking Channel Control
1.
On the remote control, press STB once; it will
blink once. Press and hold SETUP until the
STB key blinks twice.
2. Enter 9 7 3. The STB key will blink twice.
3. Press CH- once. The STB key will blink four
times.
Now the remote control will provide TV and VCR chan -
nel-control capabilities while in the TV or VCR mode.
Locking Channel Control to STB
1.
On the remote control, press STB once; it will
blink once. Press and hold SETUP until the
STB key blinks twice.
2. Enter 9 7 3. The STB key will blink twice.
3. Press CH+ once. The STB key will blink twice.
Now, regardless of what mode you select (except
AUD ), the channel keys will only change channels on
your set-top box.
CHANGING VOLUME LOCK
Volume Lock allows you to control the volume
through the device identified as having your primary
speaker(s), regardless of which mode you are using.
On the Wilkes Remote Control, Global Volume Lock is
set to TV , so you can control TV volume while in the
VCR , DVD , TV or STB mode. You can perform Indi-
vidual Volume Unlock on a selected device to set its
volume control for independent operation.
NOTE:
The audio mode’s ( AUD ) volume controls are
active regardless of Volume Lock settings. However,
if you lock the volume controls to the AUD mode, you
will have control of the audio device’s volume in all
other modes (i.e., VCR, DVD, TV , and STB ). This can
be an advantage if, for example, you always listen to
home entertainment devices through your receiver’s
speakers.
Unlocking Volume Control for a Single Device
(Individual Volume Unlock)
1. Assuming Global Volume Lock is active,
select a mode on the remote control that you
want to unlock (e.g., STB ) and press it once.
Next, press and hold SETUP until the device