Wilkes WEB2, Руководство пользователя, Страница: 29 / 44

29
INSTALLING BATTERIES
1. On the back of the remote control, push the
tab and lift off the battery cover.
2. Locate the two (2) enclosed AA batteries.
Match the + and - marks with those in the
battery case, then insert them.
3. Align the covers keys with the cases holes
and press the cover back into place. The tab
should click when the cover is locked.
4. Test the remote control by pressing any mode
key (e.g. TV). If the batteriers are inserted
correctly the LED (red light) will blink once.
NOTE:
When batteries need replacement, the remote
control will cease to operate. Replace the batteries
and the unit will be restored to its full functionality,
complete with your favorite settings.
PROGRAMMING DEVICE CONTROL
The Potenza ST Universal Remote Control can be
programmed to control not only your Wilkes set-top
box, but various TVs, DVD players, VCRs and audio re-
ceivers by using the Searching for Your Code instruc-
tions found here. The remote comes already prepro-
grammed to operate the Wilkes set-top box, an RCA
TV, a Toshiba DVD player, an RCA VCR, and a Pioneer
audio receiver. To control devices other than these
brands, use the Search method described below.
SEARCHING FOR YOUR CODE
If your home entertainment device does not respond
to the Wilkes Remote Control after trying all of the
codes listed for your brand, or if your brand is not
listed at all, try searching for your code.
For example, to search for a code for your TV:
1. Turn on your TV.
2. On the remote control, press TV once; it will
blink once. Then press and hold SETUP until
the TV key blinks twice.
3. Type 9 9 1. The TV key will blink twice.
4. Aim the remote control at the TV and press
POWER once.
5. Press and release the CH+ key continuously,
then stop when the TV turns off.
NOTE:
In the search mode, the remote control will
send IR codes from its library to the selected
device, starting with the most popular code
first.
6. Press POWER. The TV should turn on, then
press SETUP once to lock in the code. The
LED will blink twice to indicate that the code
is saved.
NOTE:
If the TV does not turn on during step 6,
then slowly press and release CH- to go back
through the codes, then press SETUP when
the TV turns on.
7.
To search for the codes of your other devices,
repeat steps 1 through 6, but substitute the
appropriate key (e.g., VCR, DVD, AUD, or STB )
for the device you are searching for.
1
3
2