Wilfa NUTRI SMOOTH SPBL-1400B, Руководство по эксплуатации

Страница: 59 / 64

Engl
ish
11
Overloading
In case of overload, it will automatically stop to prevent motor damage.
To reset the appliance, follow the steps below:
1. Turn off the appliance by the on/off switch (6) and then unplug it.
2. Remove some of the ingredients to reduce the loading.
3. Allow the appliance to cool down for 30 minutes.
4. Connect the power plug to the power supply.
5. Turn on the appliance.
Tips on ice crushing and blending
Tips on ice crushing:
•
By adding water to the ice, you get a better crushing performance.
• If you use pulse function, you will get a different crushing performance, than
if you use manual speed.
• If the ice sticks to the jug during crushing, it should be added some water.
You can also try to knock on the jug to get the ice to fall down to the knifes.
Tips on blending:
•
If you like to use hard seeds or other food which is difficult to blend, you
should try to blend these ingredients as they are, without fluid. If the
blending does not work, add fluid in small portions until it blends well.
• If the ingredients are too dry, the ingredients might not get in good contact
with the knives, so the knives don’t get hold of all the ingredients. You can
help this by add fluid and reduce the speed to minimum and give the jug
a gently knock to help the ingredients to fall down to get in good contact
with the knifes so the blending will work well.
• More tips, recipes and tricks can be found on www.wilfa.com or our local
web sites.