Wilfa Lillehammer 12, Руководство по эксплуатации

Страница: 67 / 74

11
English
4 SWING button
Press this button can select up & down swing angle. Fan blow angle can be selected circularly as below:
• When selecting ” ”, air conditioner is blowing fan automatically. Horizontal louver will automatically swing up & down at
maximum angle.
• When selecting ” , , , , ”, air conditioner is blowing fan at fixed position. Horizontal louver will stop at the fixed
position.
• When selecting ” , , ”, air conditioner is blowing fan at fixed angle. Horizontal louver will send air at the fixed
angle.
• Hold ” ” button above 2s to set your required swing angle. When reaching your required angle, release the button.
Note:
” , , ” may not be available. When air conditioner receives this signal, the air conditioner will blow fan automatically.
5 TURBO button
Under COOL or HEAT mode, press this button to turn to quick COOL or quick HEAT mode. ” ” icon is displayed on remote
controller. Press this button again to exit turbo function and ” ” icon will disappear.
6
p
/
q
button
• Press ” p ” or ” q ” button once increase or decrease set temperature 1°C. Holding ” p ” or ” q ” button, 2 s later, set
temperature on remote controller will change quickly. On releasing button after setting is finished, temperature indicator
on indoor unit will change accordingly. (Temperature can’t be adjusted under AUTO mode)
• When setting TIMER ON, TIMER OFF or CLOCK, press ” p ” or ” q ” button to adjust time.
7 SLEEP button
Under COOL, HEAT or DRY mode, press this button to start up sleep function. ” ” icon is displayed on remote controller.
Press this button again to cancel sleep function and ” ” icon will disappear.
8 TEMP button
By pressing this button, you can see indoor set temperature, indoor ambient temperature or outdoor ambient temperature on
indoor unit’s display. The setting on remote controlleris selected circularly as below:
• When selecting ” ” or no display with remote controller, temperature indicator on indoor unit displays set temperature.
• When selecting ” ” with remote controller, temperature indicator on indoor unit displays indoor ambient temperature.
• When selecting “ ” with remote controller, temperature indicator on indoor unit displays outdoor ambient temperature.
Note:
• Outdoor temperature display is not available for some models. At that time, indoor unit receives ” ” signal, while it
displays indoor set temperature.
• It’s defaulted to display set temperature when turning on the unit. There is no display in the remote controller.
• Only for the models whose indoor unit has dual-8 display.
• When selecting displaying of indoor or outdoor ambient temperature, indoor temperature indicator displays
corresponding temperature and automatically turn to display set temperature after three or five seconds
no display
(horizontal louvers
stops at current position)
no display