10
English
INTRODUCTION FOR BUTTONS ON REMOTE CONTROLLER
Note:
• This is a general use remote controller, it could be used for the air conditioners with multifunction; For some function,
which the model doesn’t have, if press the corresponding button on the remote controller that the unit will keep the
original running status.
• After putting through the power, the air conditioner will give out a sound. Operation indictor is ON (red indicator). After
that, you can operate the air conditioner by using remote controller.
• Under on status, pressing the button on the remote controller, the signal icon ”
” on the display of remote controller will
blink once and the air conditioner will give out a “de” sound, which means the signal has been sent to the air conditioner.
• Under off status, set temperature and clock icon will be displayed on the display of remote controller (If timer on, timer off
and light functions are set, the corresponding icons will be displayed on the display of remote controller at the same time);
Under on status, the display will show the corresponding set function icons.
1 ON/OFF button
Press this button can turn on or turn off the air conditioner. After turning on the air conditioner, operation indicator on indoor
unit’s display is ON (green indicator. The colour is different for different models), and indoor unit will give out a sound.
2 MODE button
Press this button to select your required operation mode.
AUTO
COOL
DRY
FAN
HEAT
• When selecting AUTO mode, air conditioner will operate automatically according to ex-factory setting. Set temperature
can’t be adjusted and will not be displayed as well. Press ”FAN” button can adjust fan speed. Press ”SWING” button can
adjust fan blowing angle.
• After selecting cool mode, air conditioner will operate under COOL mode. Cool indicator on indoor unit is ON. Press ”
p
”
or ”
q
” button to adjust set temperature. Press ”FAN” button to adjust fan speed. Press ”SWING” button to adjust fan
blowing angle.
• When selecting dry MODE, the air conditioner operates at low speed under dry MODE. Dry indicator on indoor unit is ON.
Under dry MODE, fan speed can’t be adjusted. Press ”SWING” button to adjust fan blowing angle.
• When selecting FAN mode, the air conditioner will only blow fan, no cooling and no heating. Press ”FAN” button to adjust
fan speed. Press ”SWING” button to adjust fan blowing angle.
• When selecting HEATING mode, the air conditioner operates under HEAT mode. Heat indicator on indoor unit is ON.
Press ”
p
” or ”
q
” button to adjust set temperature. Press ”FAN” button to adjust fan speed. Press ”SWING” button to
adjust fan blowing angle.
Note:
• For preventing cold air, after starting up heating mode, indoor unit will delay 1~5 minutes to blow air (actual delay time is
depend on indoor ambient temperature).
• Set temperature range from remote controller: 16~30°C ; Fan speed: auto, low speed, medium speed, high speed.
3 FAN button
Pressing this button can set fan speed circularly as: auto (AUTO), low ( ), medium (
), high (
).
Note:
• Under AUTO FAN speed, air conditioner will select proper fan speed automatically according to ex-factory setting.
• Fan speed under dry mode is low speed.
AUTO
Содержание Lillehammer 12
Страница 2: ......
Страница 74: ...AS WILFA Industriveien 25 1481 Hagan Norway wilfa com...
