7
6
English
English
➊
Kettle
➋
Lid
➌
Water scale
➍
Base plate
➎
Regulation of heat on the water, 40ºC, 70ºC, 80ºC, 90ºC and 100ºC.
➏
On / off switch
➐
Keep warm
First use of the machine
Please read these instructions carefully and keep them in a safe place. Boil fresh water in the
kettle at least twice before it is used for the first time. Use only plain water with no additives
or ingredients.
Use
•
Press the opening button to open the lid. Then fill the kettle with cold water and close
the lid by pressing down the cover until it locks.
•
Important note: On the kettle body there is a water level gauge. Please make sure not
to fill in more than the maximum level as marked on the gauge. If the kettle is over-
filled, boiling water can be spilled out. Put the kettle on the base. On the base station
there is the “ ” button for selecting different water temperatures.
•
Note: flashing light indicates current water temperature in kettle, steady light means
the target temperature.
•
Press the “ ” button which corresponds to your desired temperature. Press the “wilfa”
button to light up and the boiling process begins. As soon as the water reaches the
target temperature, the boiling stops and the “wilfa” button light off. The heating ele-
ment switches off automatically and the process has been completed. Now the unit can
be lifted up and the water can be used.
Keep warm
•
The “KEEP WARM” function allows you to maintain a specific temperature. Press
“ ” and select a temperature between 40/70/80/90/100°C. Once you have selected
your desired temperature, press the “wilfa” button. Then the kettle heats up to the
previously set value and holds it for 25 minutes.
Decaling and cleaning
•
We recommend decalcifying the kettle in regular intervals, depending on the intensity
of use. Before cleaning, it is essential to remove the power plug from the socket and
wait until the device is completely cooled down.
➊
➏
➐
➍
➌
➎
➋
Содержание FORMAT WSDK-2000B
Страница 22: ...wilfa com WSDK 2000x_20_05...