Wildfire F-131 2 Series, Инструкция пользователя

Страница: 8 / 44

8
It may be necessary to clean areas around the pilot assembly. If the appliance is running and
then turns itself off automacally for no apparent reason, it may be that the O.D.S (oxygen
monitoring device) has become parally blocked and may need to be cleaned. This can also be
caused by sudden excessive down dra so only aMempt pilot cleaning if this occurs repeatedly. PILOT
USER INSTRUCTIONS
The pilot to this appliance has a small aeraon hole at its base, somemes lint and dust can be
draw in with the air supply to the pilot.
To reduce the occurrence of such lint ingeson it is recommended that the area directly in front
of the appliance is cleaned regularly. This problem can be worse where wooden floors are
present, as lint is more free to move on these areas. Pet hair can also cause this problem
Using a thin nozzle on a vacuum cleaner this area can be cleaned to remove any lint build up.
Apply the end of the nozzle to the aeraon hole for up to 2 minutes, regularly removing and
reapplying the p of the nozzle to vary sucon.
If this procedure does not resolve such a problem then the pilot assembly will need to be
replaced. This must involve the installaon of the same part as supplied by the manufacturer.
Excessive lint build up which results in appliance operaonal problems is not covered by
warranty. It is important to ensure this preventave maintenance is performed regularly.
The pilot can be found behind the cover shown in this diagram.