Wildfire F-131 2 Series, Инструкция пользователя

Страница: 30 / 44

30
Slide the control knob to the right to the ignion symbol. Aer a
few seconds the pilot light should light.
If the pilot light does not light, release the control knob and wait
for 3 minutes before reaMempng. If the pilot does not light
aer 3 aMempts, check the baMery—see page 6. If the baMery is
new and the pilot sll fails to light, check the spark at the pilot.
Once the pilot is lit, keep the lever pushed to the right for up to
10 seconds then release. The pilot should stay lit and the central
and front log burners will now light.
The appliance is now running at the LOW seBng.
Slide the knob slowly to the le to turn the rear log burners on.
The appliance is now running at the HIGH seBng.
To turn the fire off, slide the lever all the way to the le to the
OFF symbol.
Should the spark generator fail to provide a spark at the
electrode it may be that a small amount of soot has fallen from
the fuel bed onto the pilot assembly, causing a short circuit. If
this is the case, ensuring the appliance is off and cold, this area
can be cleaned with the thin nozzle from a vacuum cleaner. See
page 6 for details on glass removal to access this area.
Alternavely check the baMery is in good condion—see page 6
for details.
INSTALLATION INSTRUCTIONS
LIGHTING
THE FIRE
4.4 Opera;ng Instruc;ons
This appliance is operated using a slide control lever.
The knob will slide from le to right, this movement controls all
funconality of the appliance, from ignion, flame control and
turning the appliance off.