Wildfire F-131 2 Series, Инструкция пользователя

Страница: 4 / 44

4
This gas appliance MUST be installed by a GAS SAFE registered installer by law. It must be
installed in accordance to these installaon instrucons and the GAS SAFETY (Installaon & Use)
REGULATIONS 1998 as amended. Non compliance of this law may lead to prosecuon and it is in
the interest of you and your family that this condion is observed. Check with your gas installer
that they have current membership to Gas Safe and that their membership includes gas fires.
It is very important that you also have your gas appliance serviced annually by a Gas Safe
registered engineer. During this service the engineer will check the operaon and performance
of the appliance and also for any debris that may have collected above or behind the appliance,
depending on installaon type. This is important for you and your families safety
Check for the Gas Safe logo on your gas engineers membership card.
2.0
Congratulaons on the purchase of your new Wildfire Ravel Gas Stove. Ensure you keep
these instrucons in a safe place as they will be required for installaon, service and general
upkeep of your appliance.
These instrucons should be followed precisely to ensure that you receive many years of trouble
free service from your appliance.
Some general maintenance is required by the user to keep the appliance in its best condion,
these are detailed later in this instrucons manual.
Do not place so wall coverings (i.e. embossed papers etc,) furniture or other combusble items
too close to the fires as they may discolour or scorch.
Do not place or throw rubbish or otherwise on the fuel-bed.
Do not place any combusble materials or flooring (i.e. carpets etc,) on any part of the hearth.
Many parts of this appliance and some surrounding areas will be come hot during use.
This appliance has a naked flame and as with all heang appliances a fireguard should be used
for the protecon of children, the elderly and infirm. The fireguard should conform to BS8423 :
2002 (Fireguards or use with Gas Heang Appliances).
It is quite normal for a flame effect gas appliance to experience a small amount of soot or
staining to some parts of the fuel effect components. If this becomes excessive it may because
the fuel bed is not fiMed correctly — this should be checked according to these installaon
instrucons prior to contacng a service engineer.
NEVER place any rubbish or otherwise onto the fire—this will affect the way the product
operates and may affect the warranty of the product.
NEVER place more ceramic components onto the fuel bed than specified in the instrucons.
NEVER
touch the ceramics when the appliance has recently been switched off—these
components retain heat and may cause burns. Leave the appliance to sufficiently cool prior to
any contact of the ceramics.
WELCOME
IMPORTANT
WARNINGS
No purpose made venlaon is normally required for this appliance when installed in G.B. If the
appliance is being installed in I.E then refer to I.S 813:1996 (Domesc Gas Installaon—Naonal
Standards Authority of Ireland). Venlaon areas (if applicable) should be checked periodically
to ensure there is no obstrucon, even though none is normally required for this appliance.
VENTILATION
USER INSTRUCTIONS