Wilden Turbo-Flo T8, Инженерия, эксплуатация и обслуживание

Страница: 17 / 32

WIL-10272-E-01
Wilden
®
17
Disassembly / Reassembly
Step 4
Remove the two small clamp bands that fasten the intake manifold
to the liquid chambers.
Step 5
Lift the intake manifold away to expose the valve balls and seats.
Inspect intake valve ball cage for excessive wear or damage. Remove
the intake valve balls, seats and o-rings from the discharge manifold
and inspect for nicks, gouges, chemical attack or abrasive wear.
Replace worn parts with genuine Wilden parts for reliable performance.
PTFE o-rings should be replaced when reassembled.
Step 6
With 14 mm (9/16") socket and 17 mm (11/16") box wrench,
remove one set of large clamp bands that attach liquid chamber
to center section assembly.
Step 7
Lift liquid chamber away from center section to expose diaphragm
and outer piston.