Wilden Pro-Flo P2, Инструкция по эксплуатации и техническому обслуживанию

Страница: 5 / 28

WIL-10150-E-12 5
P2 Clamped Plastic
SECTION 2
MATERIAL CODES
MODEL
P2 = PRO-FLO
®
WETTED PATH
K = PVDF
P = POLYPROPLYENE
OUTER PISTON
K = PVDF
CENTER BLOCK
LL = ACETAL
PP = POLYPROPYLENE
AIR VALVE
P = POLYPROPYLENE
L = ACETAL
DIAPHRAGMS
BNS = BUNA-N (RED DOT)
EPS = EPDM (BLUE DOT)
FSS = SANIFLEX™
[HYTREL
®
(CREAM)]
FWL= FULL STROKE SANITARY WIL-FLEX™
IPD) SANTOPRENE® (TWO BLACK DOTS)]
LEL= PTFE-EPDM BACKED LAMINATE IPD
(TWO BLUE DOTS)
NES = NEOPRENE (GREEN DOT)
SSL = FULL-STROKE SANIFLEX™
IPD [HYTREL
®
(CREAM)]
TEU = PTFE W/EPDM
BACK-UP (WHITE)
TNU = PTFE W/NEOPRENE
BACK-UP (WHITE)
TSS = FULL-STROKE PTFE
W/SANIFLEX™ BACKUP
TSU = PTFE W/SANIFLEX™
BACKUP (WHITE)
TWS = FULL-STROKE PTFE
W/WIL-FLEX™ BACKUP
VTS = FKM (WHITE DOT)
WFS = WIL-FLEX™ [SANTOPRENE
®
(THREE BLACK DOTS)]
WWL = FULL STROKE WIL-FLEX™ IPD)
SANTOPRENE® (THREE BLACK DOTS)]
VALVE BALLS
BN = BUNA-N (RED DOT)
EP = EPDM (BLUE DOT)
FS = SANIFLEX™
[HYTREL® (CREAM)]
NE = NEOPRENE (GREEN DOT)
TF = PTFE (WHITE)
VT = FKM (WHITE DOT)
WF = WIL-FLEX™ [SANTOPRENE®
(THREE BLACK DOTS)]
VALVE SEATS
K = PVDF
P = POLYPROPYLENE
O-RINGS
BN = BUNA-N (RED DOT)
TV = PTFE ENCAP. FKM
WF = WIL-FLEX™ (SANTOPRENE®)
SPECIALTY CODES
0100 Wil-Gard II™ 110V
0102 Wil-Gard II™ sensor wires ONLY
0103 Wil-Gard II™ 220V
0206 PFA coated hardware,Wil-Gard II™ sensor
wires ONLY
0400 P2 plastic
0402 P2 plastic, PFA coated hardware
0404 P2 plastic, DIN flange
0406 P2 plastic, PFA coated hardware,flange
0415 P2 plastic, Wil-Gard II™ sensor wires ONLY
0416 P2, PFA coated hardware,
Wil-Gard II™ sensor wires ONLY
0420 P2 plastic, Wil-Gard II™ 110V
0423 P2 plastic, PFA coated hardware,
Wil-Gard II™ 110V
0424 P2 plastic, Wil-Gard II™ 220V, DIN flange
0426 P2 plastic, PFA coated hardware, WilGard II™
220V, DIN flange
0428 P2 plastic, Wil-Gard II™ 220V
0430 P2 plastic, SS outer pistons
0502 PFA coated hardware
0560 Split manifold
0561 Split manifold, PFA coated hardware
0563 Split manifold, discharge ONLY
0564 Split manifold, inlet ONLY
0603 PFA coated hardware, Wil-Gard II™ 110V
0608 PFA coated hardware, Wil-Gard II™ 220V
0660 Split manifold, Wil-Gard II™ 110V
0661 Split manifold, PFA coated hardware,
Wil-Gard II™ 110V
NOTE: Most elastomeric materials use colored dots for identification. NOTE: Not all models are available with all material options
P2 PLASTIC
LEGEND P2 / X X X X X / X X X / X X / X X X / X X X X
25 mm (1") Pump
Maximum Flow Rate:
140 lpm (37 gpm) O-RING
MODEL VALVE SEAT SPECIALTY
VALVE BALL CODE
DIAPHRAGMS
AIR VALVE
CENTER BLOCK
AIR CHAMBERS
OUTER PISTON
WETTED PATHS
WILDEN PUMP DESIGNATION SYSTEM
(if applicable)