WIL-10150-E-12
18
P2 Clamped Plastic
Step 4
Step 5
Step 6
Remove air valve end cap to expose air
valve spool by simply lifting up on end cap
once air valve bolts are removed.
Remove pilot spool sleeve retaining snap
ring on both sides of center section with
snap ring pliers.
NOTE:
Seals should not be removed from
assembly. Seals are not sold separately.
Remove pilot spool retaining snap
ring on both sides of center section
with snap-ring pliers.
Step 7
Step 8
Remove pilot spool sleeve from
center section.
With O-ring pick, gently remove pilot spool
retaining O-ring
.
Replace if necessary.
Gently remove pilot spool from sleeve and
inspect spool and seals for nicks, gouges or
other signs of wear . Replace pilot sleeve
assembly or outer sleeve O-rings if
necessary.
NOTE:
Seals should not be removed from
assembly. Seals are not sold separately.
DISASSEMBLY / REASSEMBLY
