background image

W A R R A N T Y

Each and every product manufactured by Wilden Pump and Engineering, LLC is built to meet the highest 
standards of quality. Every pump is functionally tested to insure integrity of operation.
Wilden Pump and Engineering, LLC warrants that pumps, accessories and parts manufactured or supplied by 
it to be free from defects in material and workmanship for a period of five (5) years from date of installation or 
six (6) years from date of manufacture, whichever comes first. Failure due to normal wear, misapplication, or 
abuse is, of course, excluded from this warranty.
Since the use of Wilden pumps and parts is beyond our control, we cannot guarantee the suitability of any pump 
or part for a particular application and Wilden Pump and Engineering, LLC shall not be liable for any consequential 
damage or expense arising from the use or misuse of its products on any application.  Responsibility is limited 
solely to replacement or repair of defective Wilden pumps and parts.
All decisions as to the cause of failure are the sole determination of Wilden Pump and Engineering, LLC.
Prior approval must be obtained from Wilden for return of any items for warranty consideration and must be 
accompanied by the appropriate MSDS for the product(s) involved. A Return Goods Tag, obtained from an 
authorized Wilden distributor, must be included with the items which must be shipped freight prepaid.
The foregoing warranty is exclusive and in lieu of all other warranties expressed or implied (whether written or oral) 
including all implied warranties of merchantability and fitness for any particular purpose. No distributor or other 
person is authorized to assume any liability or obligation for Wilden Pump and Engineering, LLC other than expressly 
provided herein.

Item # 

Serial # 

Company Where Purchased

Company Name

Industry

Name Title

Street Address

City 

State 

Postal Code 

Country 

Telephone 

Fax 

E-mail 

Web Address 

Number of pumps in facility? 

Number of Wilden pumps?

Types of pumps in facility (check all that apply): 

 Diaphragm  

 Centrifugal 

 Gear 

 Submersible 

 Lobe

 

 Other  

Media being pumped? 

How did you hear of Wilden Pump? 

 Trade Journal 

 Trade Show 

 Internet/E-mail 

 Distributor 

 

 Other 

ONCE COMPLETE, FAX TO (909) 783-3440

NOTE: WARRANTY VOID IF PAGE IS NOT FAXED TO WILDEN

WILDEN PUMP & ENGINEERING, LLC

PLEASE PRINT OR TYPE AND FAX TO WILDEN

P U M P   I N F O R M AT I O N

YO U R   I N F O R M AT I O N

Содержание HS400S

























Отзывы: