2147614.07 GB/D/F/E 04/2009
WIKA Operating instructions/Betriebsanleitung/Mode d'emploi/Instrucciones de servicio N-10, N-11
2147614.07 GB/D/F/E 04/2009
WIKA Operating instructions/Betriebsanleitung/Mode d'emploi/Instrucciones de servicio N-10, N-11
Contents Page -18
GB
1. Important details for your information
2. A quick overview for you
3. Signs, symbols and abbreviations
4. Function
5. For your safety
6. Packaging
7. Starting, operation
8. Maintenance, accessories
9. Trouble shooting
10. Storage, disposal
11. EC declaration of conformity
WIKA Global Page 68
Inhalt Seite 19-4
D
1. Wichtiges zu Ihrer Information
2. Der schnelle Überblick für Sie
3. Zeichenerklärungen, Abkürzungen
4. Funktion
5. Zu Ihrer Sicherheit
6. Verpackung
7. Inbetriebnahme, Betrieb
8. Wartung, Zubehör
9. Störbeseitigung
10. Lagerung, Entsorgung
11. EG-Konformitätserklärung
WIKA Global Seite 68
Contenu Page 5-50
F
1. Informations inportantes
2. Aperçu rapide
3. Explication des symboles,abréviations
4. Fonction
5. Pour votre sécurité
6. Emballage
7. Mise en service, exploitation
8. Entretien, accessoires
9. Elimination de perturbations
10. Stockage, mise au rebut
11. Déclaration de confeamité CE
WIKA Global Page 68
Contenido Paginás 51-66
E
1. Detalles importantes para su información
2. Resumen rápido para usted
3. Signos, símbolos y abreviaciones
4. Función
5. Para su seguridad
6. Embalaje
7. Puesta en servicio, funcionamiento
8. Mantenimiento, accesorios
9. Eliminación de perturbaciones
10. Almacenaje, eliminación de desechos
11. Declaración de conformidad CE
WIKA Global Paginá 68
Contents / Inhalt / Contenu / Contenido
E
F
1. Important details for your information
GB
Use of the product in accordance with the intended use N-10, N-11:
Use the non-incendive pressure transmitter to transform the pressure into an electrical signal
in hazardous areas, where category 3G resp. 3D equipment is required.
1. Important details for your information
Read these operating instructions before installing and starting the pressure transmitter. Keep
the operating instructions in a place that is accessible to all users at any time.
The following installation and operating instructions have been compiled by us with great care
but it is not feasible to take all possible applications into consideration. These installation and
operation instructions should meet the needs of most pressure measurement applications. If
questions remain regarding a specific application, you can obtain further information:
Via our Internet address www.wika.de / www.wika.com
The product data sheet is designated as PE 81.26
Contact WIKA for additional technical support (+49) 9372 / 132-295
If the serial number on the product label and/or the 2D code on the hexagon gets illegible (e.g.
by mechanical damage or repainting), the retraceability of the instrument is not possible any
more.
WIKA pressure transmitters are carefully designed and manufactured using state-of-the-art
technology. Every component undergoes strict quality and environmental inspection before
assembly and each instrument is fully tested prior to shipment. Our environmental manage-
ment system is certified to DIN EN ISO 14001.
GB
D
Certificate ATEX:
Pressure transmitter for operation in hazardous areas
II 3G EEx nA II T6 and II 3D IP65 T80°C
Knowledge required:
Install and start the pressure transmitter only if you are familiar with the
relevant regulations and directives of your country and if you have the qualification required.
You have to be acquainted with the rules and regulations on hazardous areas, measurement
and control technology and electric circuits, since this pressure transmitter is „electrical
equipment“ as defined by EN 50178. Depending on the operating conditions of your applica-
tion you have to have the corresponding knowledge, e.g. of aggressive media.
