WIKA FSD-4, Руководство по эксплуатации

Страница: 16 / 140

14399527.01 05/2021 EN/DE/FR/ES
16 WIKA operating instructions flow switch, model FSD-4
EN
5.5 Overview of parameters
Menu
item
Description Parameter Factory
setting
INI Initialisation menu - -
UNIF Flow unit m/s, l/min, m3/h(m³/h), FT/s, FT3m (ft³/s),
UGPm (US Gal/min), GPm (Imp. Gal/min), %
m/s
TIF Min / Max flow setting, only active with UNIF = % MIN (NO/YES) sets current flow value to 0 %
MAX (NO/YES) sets current flow value to 100 %
-
0SET Zero point setting /“Autozero” version, only active
when UNIF ≠ %
YES/NO
YES sets current flow value to zero
-
mu_F Flow multiplier, only active when UNIF ≠ % 0.10 … 10.00 1.00
uniT Temperature unit °C, °F °C
PIPD Pipeline diameter in mm, only active when UNIF ≠ % 10 … 1,000 25
SP1 / SP2 Hysteresis function: Switch point (switching output 1
if applicable 2)
0.05 … 3 m/s [0.17... 9.84 ft/s]
1.7 … 100 %
If SP2 is configured for temperature:
-18.2 ... +85 °C [-0.8 ... +185 °F]
3.000 (m/s)
FH1 / FH2 Window function
Window high (switching output 1, if applicable 2)
- -
RP1 / RP2 Hysteresis function: Reset point (switching output 1,
if applicable 2)
0 … 2.950 m/s [0 ... 9.67 ft/s]
0 … 98.3 %
If SP2 is configured for temperature:
-20 ... +78.2 °C [-4 ... +172.8 °F]
2.700 (m/s)
FL1 / FL2 Window function
Window low (switching output 1, if applicable 2)
- -
EF Extended programming functions - -
RES Reset the parameters to factory setting YES/NO -
DS1 /
DS2
Switching delay time, which must occur without
interruption before any electrical signal change occurs
(SP1, if applicable SP2)
0.00 ... 65.00 s 0.00 s
5. Commissioning, operation