WIKA F1201, Руководство по эксплуатации

Страница: 4 / 40

WIKA operating instructions, model F1201
EN
14505091.01 08/2021 EN/DE
4
1. General information
1. General information
■
The compression force transducer described in the operating instructions has been
designed and manufactured using state-of-the-art technology. All components
are subject to stringent quality and environmental criteria during production. Our
management systems are certified to ISO 9001.
■
These operating instructions contain important information on handling the instru-
ment. Working safely requires that all safety instructions and work instructions are
observed.
■
Observe the relevant local accident prevention regulations and general safety regula-
tions for the instrument's range of use.
■
The operating instructions are part of the product and must be kept in the immediate
vicinity of the instrument and readily accessible to skilled personnel at any time. Pass
the operating instructions on to the next operator or owner of the instrument.
■
Skilled personnel must have carefully read and understood the operating instructions
prior to beginning any work.
■
The general terms and conditions contained in the sales documentation shall apply.
■
Subject to technical modifications.
■
Factory calibrations / DAkkS calibrations are carried out in accordance with interna-
tional standards.
Further information:
- Internet address: www.wika.de
- Relevant data sheet: FO 51.71 (F1201)
- Application consultant: Tel.: +49 9372 132-0
Fax: +49 9372 132-406
info@wika.de
Abbreviations, definitions
2-wire The two connection leads are used for the voltage supply.
The measuring signal also provides the supply current.
3-wire Two connection leads are used for the voltage supply.
One connection lead is used for the measuring signal.
4-wire Two connection leads are used for the voltage supply.
One connection lead is used for the measuring signal.
S+ Positive output terminal
S- Negative output terminal
Shield Case
SG Strain gauge