14
3.
Faults and maintenance
Make sure the weighing equipment is in the lowest position during maintenance. Prevent any inadvertent operation
of the weighing equipment during maintenance by turning the tractor engine off and taking the key from the
ignition.
3.1
Troubleshooting
For WI-5000-T: See “Digi-star EZ 400” operators manual.
For WI-5000-TS: See “Risseeuw spreading computer” operators manual.
Please contact your dealer for any further concerns you may have. He will be pleased to assist.
Warning:
Do not conduct any welding jobs on the weighing equipment to prevent damage to the weighing sensors.
Remove the weighing equipment during welding jobs on the tractor or machine.
ATTENTION:
When hosing down the machine, make sure not to aim for the cable inlet of the weighing pins to avoid
damage to the weighing pins as a result of moisture.
N.B.:
Please read the instructions from the manual prior to any maintenance to the
machine!
Turn off the engine and remove the key from the ignition for the time maintenance
on the machine is carried out!
