2 |
Safety instructions
8
Wieland Electric GmbH | BA001098 | 09/2016 (Rev. A)
2
Safety instructions
This chapter describes the safety instructions for you and the operators of the devices. Carefully read this
chapter before you start work with an access point.
General safety instructions
•
Any person installing, programming, operating or servicing
wienet
access points
must have read and understood this user manual.
•
The staff must be thoroughly familiar with all warnings, instructions and
requirements contained in this manual.
•
The corresponding local safety, protective and installation requirements must be
met.
The user is solely responsible for selecting the correct products and technical version in
accordance with the corresponding local regulations.
WARNING
2.1
Qualified persons
The installation, configuration for operation, commissioning and servicing of
wienet
access points may only be
carried out by qualified persons.
Qualified persons:
•
have appropriate technical training and
•
have access to the assembly instructions and the user manual for the
wienet
access points, which have
been read and understood.
2.2
Intended use
The
wienet
access point has a WLAN interface (IEEE 802.11 n/b/g) and an Ethernet-10/100 MBit/s connection
and can be operated in various modes. The device has been designed to connect wired Ethernet-10/100 MBit/s
networks or devices with other networks or network devices via WLAN.
Please observe the following instructions:
•
Do not use the access point for any other purposes.
•
The access point may only be used in accordance with current international and
national regulations, as well as in accordance with all special restrictions on the
use of the access points in prescribed applications and environments.
•
Only use original accessories to prevent injuries as well as damage to the devices
and to ensure that all relevant regulations have been adhered to. Prohibited
changes or the use of non-approved accessories may damage the access point
and violate existing laws. Prohibited changes or the use of non-approved
accessories may result in the invalidity of warranty claims.
•
The access point may not be opened.
•
The voltage at the feeder connection of the access point may not be exceeded
(see 9 Technical data).
•
Do not expose the access point to extreme environmental conditions. Protect the
access point against dust, humidity and high temperatures.
•
It is recommended that you make a copy or backup of all major settings stored in
the device memory.
WARNING
Any other application or change to the device – even during assembly and installation – will result in the
invalidity of any warranty claims against Wieland Electric GmbH.
